General Discussion

Topic / Topic starter Replies Last postsort ascending
Normal topic Caps/covers in cabin ceiling
by keith.barton » Mon, 03/12/2018 - 5:23pm
7
by patrick.saddler
Tue, 04/12/2018 - 2:11pm
Normal topic John Anstice-Brown's MacGregor 19 (Page: 1, 2)
by quentin.sands » Wed, 28/11/2018 - 5:34pm
13
by quentin.sands
Sun, 02/12/2018 - 4:08pm
Hot topic Sail for M (Page: 1, 2, 3)
by john.pompei » Sun, 04/11/2018 - 3:27pm
26
by peter.cullender
Tue, 27/11/2018 - 1:41pm
Normal topic AGM 2019
by keith.barton » Thu, 15/11/2018 - 9:27am
2
by keith.barton
Thu, 15/11/2018 - 11:19am
Normal topic AGM 2019
by simon.armitage » Tue, 13/11/2018 - 9:27pm
2
by peter.cullender
Thu, 15/11/2018 - 1:09am
Normal topic Windows on M (Page: 1, 2)
by john.pompei » Wed, 31/10/2018 - 12:19pm
11
by jonathan.knight
Sat, 10/11/2018 - 5:40pm
Normal topic Thanks for all your help
by tim-jen.arnold » Sun, 04/11/2018 - 7:38pm
1
by rick.jones
Sun, 04/11/2018 - 8:48pm
Normal topic Anchors (Page: 1, 2)
by keith.barton » Mon, 29/10/2018 - 9:15am
14
by dave.newton
Tue, 30/10/2018 - 5:34pm
Hot topic Does anyone want a 26M daggerboard mould? (Page: 1, 2, 3)
by mike.clarke » Thu, 27/09/2018 - 11:22pm
29
by mike.clarke
Mon, 29/10/2018 - 12:46pm
Normal topic Planar Diesel heater
by keith.barton » Wed, 24/10/2018 - 2:03pm
4
by simon.armitage
Wed, 24/10/2018 - 6:43pm
Normal topic Help with sea trial
by colin.soens » Tue, 16/10/2018 - 11:50am
3
by howell.clark
Tue, 23/10/2018 - 9:14am
Normal topic Motoring on non-tidal waterways
by john.pompei » Sun, 16/09/2018 - 5:21pm
8
by john.pompei
Mon, 24/09/2018 - 6:52pm
Normal topic Tiller to rudder link
by chris.williams » Tue, 11/09/2018 - 7:18am
0
by chris.williams
Tue, 11/09/2018 - 7:18am
Normal topic Rubbing strake
by quentin.sands » Wed, 29/08/2018 - 1:50pm
3
by mike.floutier
Wed, 05/09/2018 - 7:35pm
Normal topic 26 C Tiller
by quentin.sands » Wed, 29/08/2018 - 1:27pm
2
by james.brine
Wed, 05/09/2018 - 6:51pm
Normal topic Drying moorings
by stuart.mcwilliam » Wed, 11/07/2018 - 8:19pm
2
by mike.floutier
Sat, 25/08/2018 - 8:30pm
Normal topic Re engining my Mac 26x (Page: 1, 2)
by david.bayliss » Sun, 29/07/2018 - 11:37am
13
by dave.newton
Fri, 17/08/2018 - 2:30pm
Hot topic 26X Centreboard woes (Page: 1, 2)
by stuart.mcwilliam » Fri, 29/06/2018 - 5:43pm
15
by rick.jones
Thu, 19/07/2018 - 6:01pm
Normal topic replacement 26M daggerboard
by mike.clarke » Fri, 13/07/2018 - 11:24pm
5
by keith.barton
Sun, 15/07/2018 - 11:18am
Normal topic Mac 26X rigging
by david.bayliss » Fri, 06/07/2018 - 12:38pm
3
by david.bayliss
Fri, 06/07/2018 - 2:47pm
Hot topic Mac 26M in gusty conditions (Page: 1, 2, 3)
by john.pompei » Wed, 20/06/2018 - 7:15pm
23
by roly.simpson
Sat, 30/06/2018 - 5:52pm
Normal topic Spray Hood
by mark.newall » Fri, 25/05/2018 - 1:40pm
3
by roly.simpson
Mon, 11/06/2018 - 10:18pm
Normal topic Rigging
by simon.wagstaffe » Fri, 25/05/2018 - 1:03pm
7
by mike.floutier
Wed, 30/05/2018 - 5:01pm
Normal topic VAT
by jim.rotheram » Wed, 09/05/2018 - 8:12pm
8
by jim.rotheram
Tue, 22/05/2018 - 7:16pm
Normal topic Kill cords
by rick.jones » Sun, 26/11/2017 - 11:54pm
10
by rick.jones
Fri, 04/05/2018 - 1:16pm
New posts
No new posts
Hot topic with new posts
Hot topic without new posts
Sticky topic
Locked topic
Subscribe to RSS - General Discussion